Incredible How To Backwash A De Filter Pentair 2022. Turn the high flow manual air relief valve a quarter turn counter clockwise. Turn the filter system off.
At my new house, i don't see anything like that around the filter. However, if you are backwashing the filter, you will need to add just 80% (4.8 pounds) of this afterward. You should then be able to restart the motor.
This How We Recommend To Check And See If You Need To Back Wash And Or Clean You Pentair Fns 60 De Filter When You Have A Flow Meter Installed.
I've looked underneath it and see nothing as well. Turn the high flow manual air relief valve a quarter turn counter clockwise. Attach your pool hose to the backwash port on your sand filter.
My Previous Home Also Had A Pool (That I Had Installed) And Our Pentair De Filter At That Home Had The Easy Pull/Push Valve For Backwashing.
When tank is empty turn filter on. I have posted pictures for reference. Table iv or instruction decal on filter shell for amount of de to use.
Turn The Pool Pump On.
Close valve before air is drawn into system. Stand clear of the filter and start the pump. Shut off the pump at the main power switch or, even better, at the circuit breaker box.
Set Control Valve To Backwash Position.
The first thing you will do is turn off the system, change the valve position to the backwash position. Innovative design of the system:3 mod media filter is now available in the smaller system:2 filter. Before getting started, make sure that the motor and skimmer baskets are clear of all debris.
If You Have A Multiport Valve, You Will Press Down On The Handle And Spin It So That The Knotch Is Pointed To Backwash.
This maximizes water flow to help hasten the backwashing process. After backwashing is complete add 1 1/2 lbs less d.e. Backwash filter for approximately 3 to 5 minutes or until backwash water is clean.
